Pencil Hardness Tester HT-6510P - Guangzhou Landtek Instruments Co.,LTD

Provide high-tech measuring products and technical developments for instrument service providers

NDT and Photoelectric Measurements

产品详情

Share to：

Pencil Hardness Tester HT-6510P

Spec：	Coating hardness is the neccessary measurement for the performance of coatings.This instrument applied the Pencil Scratch Method.It is a fast and economical way to determine the film hardness using th
Model：	HT-6510P

产品详情

Principle　

The instrument applies mechanical measurement.Keep three point touch the coating(two wheel,a pencil core),and a 45 degree angle between pencil and test surface.Push the instrument sliding,pencil draws the corresponding track in the coating.In the change of different pencil marks,the hardness value of the film can be determined.

Standards

《GB/T 6739-96》 Coating Hardness Pencil Test Method
《ASTM D3363-00》 Standard Test Method for Determination of Coating Hardness by Pencil Test Method
《GB/T 1727-92》 General Method for Preparing Film

Structure Description　

Specifications　

Load Weight	1000g / 750g / 500g
Measurement Angle	45°
Three Touch Points	Two Wheels,a Pencil Core
Scratch Speed	About 1 mm/s
Standard Configuration	Pencil Hardness Tester
	1000g Weight
	750g Weight
	13 Pencils（6B-6H）
	Eraser
	Knife
	Horizontal Pad Block
	Sandpaper

　Downloads

Pencil Hardness Tester HT-6510P_Catalog

Pencil Hardness Tester HT-6510P_EN_Manual

　RS232Software

NOTE: The name of RS232 Software is 'RS232_EN_4.0.rar' after downloading. Just decompress 'RS232_EN_4.0.rar' with Decompress Software, Enter password:www.landtek.cn. a folder named 'RS232_EN_4.0' is abtained. There are RS232 Software and install instruction inside the folder.